How To Reset Password On Lorex Dvr – A Comprehensive & Detailed Guide

Ethan Sullivan
By Ethan Sullivan 10 Min Read
10 Min Read

Hey there! So, you have a Lorex DVR or NVR, and it seems like you’ve forgotten your admin password. Don’t worry, it happens to the best of us! 🙃 In this article, we’re going to walk through some easy ways to get it back.

Forgetting the admin password means you can’t get into your DVR, but don’t panic, we’ve got some solutions to help you out! Depending on the type of Lorex recorder you have, how old it is, its firmware version, and a couple of other things, we have different methods that could work for you to reset it.

Which Models Can We Reset?

So, you are ready to reset your password, but you might be wondering if your specific Lorex DVR or NVR model can be reset using these methods. Well, let’s clear that up!

Check Out the Models Below!

Here’s a list of the models that these cool resetting tricks can work on:

  • 4K Series Models:
    • 4KAI1610, 4KFPS84, 4KFPS84ZM, 4KHDIP1610, 4KHDIP1612AD, 4KHDIP1612I… and many more!
  • HD Series Models:
    • HDIP1688DW, HDIP321010DW, HDIP32128W, HDIP3214144AVZW… you get the idea.
  • LN Series Models:
    • LN10802-166W, LN10802-168W, LN10802-84W, LN10804-1612W, LN10804-86W… and others too!
  • 2K Series Models:
    • 2KHDIP3228D, 2KHDIP844D, 2KA166BD, 2KA84… yes, these as well!
  • Other Cool Models:
    • DF162-A2NAE-W, DF162-C2NAE-W, DP181-82NAE-W… and more!

Resetting Your Lorex Password: A Step-by-Step Guide

So, you’ve checked the list and found your model. Now, let’s get to the actual steps to reset your Lorex recorder’s password. Don’t worry, I’m here to guide you through it!

Method 1: Pushing the Reset Button

Does Your Model Have a Reset Button?

The first method is pretty straightforward, but it’ll depend on whether your DVR/NVR model has a reset button. This button would usually be located on the motherboard of your recorder.

Here’s How to Find and Use It:

  1. Open Your Recorder: Crack open the case of your DVR/NVR and look inside.
  2. Find the Button: If there’s a reset button, it should be a small black circle that you can press. Check the corner of the motherboard or close to the processor, like in the pictures provided. If you can’t find one, then your recorder may not have it, and you can try the other methods.
READ ALSO:  How to Remove Card From Lyft? – About Lyft App

Follow These Steps to Reset:

  1. Power it Down: Turn off your DVR/NVR.
  2. Press and Hold: Find and press the reset button and keep it held down.
  3. Power it Up: While still holding the reset button, turn your DVR/NVR back on.
  4. Wait a Bit: Keep the button pressed for about 30 seconds.
  5. Setup Time: Once you see the startup wizard on your screen, you can set up a new password!

Important Tips:

  • Connect a monitor to your DVR/NVR so you can see when the startup wizard pops up.
  • Make sure the power cable is unplugged before you start the procedure, then plug it back in while holding the reset button.
  • If your Lorex model has an on/off switch at the back, you can use that too.
  • Keep that reset button pressed until the startup wizard appears.

Setting Up a New Password

After the reset, your recorder will have the factory default settings, and it’s time to create a new password.

Secure Your Device:

  • Be Strong and Secure: When creating a new password, make it strong! Use a mix of letters, numbers, and symbols to make it hard to guess.
  • Create and Remember Your Pattern: Set up a new pattern and answer the security questions. These can help you if you forget your password again. So write them down and keep them safe!

Method 2. Try Lorex default passwords

You never know but this may be the solution of your problem. Try all the default accounts listed below :

Username Password Role
admin admin Master user
888888 888888 Administrator
666666 666666 Guest user
default default Hidden user

If you’re able to log in, you can create a new account or modify the password. If this method doesn’t work or the account that works has guest authority only, you can try the next method.

Method 3: Using the Lorex Daily Password Generator

Some Lorex DVR/NVR models use a special master password generator, which is actually a Dahua password generator. This tool creates a temporary password for you to use, based on the date showing on your recorder’s timestamp.

Step by Step:

  1. Find the Current Date: Look at the timestamp on your recorder to find the current date.
  2. Enter the Date: Type the date (in YYYYMMDD format) into the Lorex password generator.
  3. Generate Password: Get your temporary password (it’s only valid for that day!).
  4. Log In: Use this temporary password to log in to your recorder.
  5. Modify Password: Once you’re in, you can change the password. Remember, use the temporary one as the old password.


  • Double-check the date you input; if it’s wrong, the generated password won’t work.

Method 4: The CCTV Super Password Generator

Another Helpful Tool:

If the daily password generator didn’t work for you, here’s another master password generator that might do the trick.

Getting the App:

  1. Download the App: The CCTV Super Password app is available on the Play Store for Android phones (sorry, iPhone users!). If you can’t find it in the store, download it here or on Google Play Store.
  2. Use the Online Version: If you have an iPhone, you can try the online version instead.
READ ALSO:  How To Change Wifi Network On Shark Robot - A Comprehensive & Detailed Guide

How to Use It:

  1. Input Date or Serial Number: You can type in the date from the timestamp or the serial number found on the label underneath your recorder.
  2. Generate the Super Password: The tool will give you a temporary super password.
  3. Log In and Change Password: Use this password to log in to your recorder, and then you can modify your password, using the super password as the old one.

Important Points:

  • This super password is also temporary and meant to be used one time only.
  • Ensure you modify your password once you gain access to your DVR/NVR using the super password.

Method 5: Reset by Removing the Battery

Getting to the Basics:

Sometimes, removing the battery from the motherboard can reset the system clock, allowing you to use a known master password to regain access to your Lorex DVR/NVR.

Here’s How You Do It:

  1. Remove the Battery: Open the device and carefully remove the battery.
  2. Wait a Bit: Wait for about 2 minutes to allow the DVR’s clock to reset. (This only works on some Lorex models.)
  3. Check the Timestamp: The DVR’s date/time stamp should now show 01/01/2000.
  4. Try These Combinations: Use username: admin and password: 668648 or admin and password: 000000000000 to log in.

Method 6: Contact Lorex Support or Dealer

A Direct Approach:

If you bought your Lorex DVR/NVR directly from Lorex or a dealer, you could call them for help with resetting the password. This can often be the fastest and easiest way!

Before You Call:

You need to provide your device ID, device model number, and the date on the system, so have this information handy. For security, online support can’t reset Lorex passwords.

How to Get the Info:

  1. Turn On Your System: Note the date displayed on your screen.
  2. Press the Enter or Info Button: These are located on your device. If you can’t find these buttons, reveal the Quick Menu and go to Info.
  3. Note the Device ID and Model Number: Send this information to Lorex support.

What Happens Next:

Lorex support will send you a master password. Use it to log in to your locked recorder. Go to the Main Menu and press Account. Press the Modify icon to change your password.

Changing Your Password:

  1. Go to Modify User Settings: Turn on Modify Password.
  2. Enter the Master Password: This goes in the Old Password field. Then, enter your new password twice.
  3. Save It: Click OK to save your new password.

Important Reminder:

Now, this new password will be your key to accessing your Lorex security camera system, whether you’re using phones, tablets, or computers.

In Conclusion:

Resetting your Lorex password may seem tricky, but these methods should help you regain access. Always note down your passwords and security questions to avoid hassles in the future, and remember to keep your system secure with strong, unique passwords!

READ ALSO:  What Does Reference Code s0900 Mean? – Spectrum Ref Code s0900

Frequently Asked Questions

How do I reset the password on my Lorex DVR?

To reset the password on your Lorex DVR, you need to use the DVR's built-in menu system. First, turn on the DVR and connect it to a monitor or TV. From the main menu, navigate to the "System" or "Settings" option. Look for the "Password" or "Account" section and choose the option to reset the password. Follow the on-screen instructions to complete the password reset process.

What if I forgot the password for my Lorex DVR?

If you forgot the password for your Lorex DVR, you can still reset it. Look for a small reset button on the back or bottom of your DVR device. Use a pointed object like a paperclip or pin to press and hold the reset button for about 10 seconds. This will restore the DVR's settings to factory defaults, including the password. You can then set a new password using the built-in menu system.

Can I reset the password remotely for my Lorex DVR?

No, you cannot reset the password remotely for your Lorex DVR. The password reset process requires physical access to the DVR and its menu system. You need to be in front of the DVR connected to a monitor or TV to navigate through the options and reset the password. Remote access or control through a computer or mobile device will not allow you to reset the password.

Will resetting the password erase my Lorex DVR's recorded footage?

No, resetting the password on your Lorex DVR will not erase the recorded footage. The password reset process only affects the DVR's settings and does not delete any recorded videos or other data. However, it is important to note that performing a factory reset on the DVR will erase all settings, including network configurations and recording schedules.

After resetting the password, can I retrieve my Lorex DVR's previous settings?

No, resetting the password on your Lorex DVR will restore the device to its factory default settings. This means all previous settings, including network configurations, recording schedules, and customized preferences, will be erased. You will need to reconfigure the DVR according to your requirements after the password reset.

What should I do if I encounter issues during the password reset process?

If you face any difficulties while trying to reset the password on your Lorex DVR, there are a few troubleshooting steps you can follow. First, ensure that you are following the correct procedure as outlined in the user manual or Lorex's official documentation. Check that your DVR has enough power and is properly connected to a monitor or TV. If the issue persists, you may contact Lorex customer support for further assistance.

Share This Article
Hey there, I'm Ethan, a tech enthusiast and copywriting expert. With a passion for all things tech, I've had the privilege of working with various tech blogs, sharing my expertise on topics ranging from Tech, Android, Windows, Internet, Social Media, Gadgets, to Reviews. With 8 years of experience in digital marketing, I'm committed to delivering informative and engaging content to my readers. Join me as we dive into the exciting world of technology together.
Leave a comment

Leave a Reply

Your email address will not be published. Required fields are marked *