How To Change Wifi Network On Shark Robot – A Comprehensive & Detailed Guide

Ethan Sullivan
By Ethan Sullivan 8 Min Read
8 Min Read

Changing your Shark Robot’s Wi-Fi network may seem intimidating. But don’t worry! We’ll take you through it step-by-step.

Why do you need to change your network? Maybe you’ve moved or changed your internet service provider. It’s important to make sure your robot is connected to the right network.

Step 1: Power your Shark Robot on and get it close to your router. This will give you a strong connection when you set it up. Open the SharkClean Mobile App and go to the settings menu.

Find the “WiFi Network” or “Network Connection” option. Follow the instructions on the app. You’ll have to enter the password for your new network. Once the app connects your robot to the new network, you’ll get a confirmation message.

Make sure your own internet connection is stable too. This will make it easier to switch networks.

Understanding the Shark Robot Wi-Fi Connection

To make the most of your Shark Robot, follow these 4 steps:

  1. Ensure a steady Wi-Fi signal throughout your home.
  2. Find your network in the Shark Robot’s settings and enter the password.
  3. Pair it with the compatible app or device and follow the instructions provided.
  4. Test and troubleshoot if any issues arise.

Also, remember to keep your Shark Robot within range of your Wi-Fi signal, and update the information if you change the name or password of your home network.

Be the master of your own destiny and enjoy the convenience of a hassle-free cleaning experience with the Shark Robot Wi-Fi Connection. Dive into the depths of its settings and cruise through your daily life with ease!

Step 1: Accessing the Shark Robot Settings

  1. Connect your device to the Shark Robot’s Wi-Fi signal. Find it in your device’s list of available networks.
  2. Open the SharkClean app. It allows you to control the Robot.
  3. In the app, navigate to the settings menu. It’s usually in the top left or right corner of the screen.
  4. Look for “Robot Settings”. Tap it to access the settings.
  5. Within the settings, find the option to change Wi-Fi. Follow any instructions to complete it.
READ ALSO:  Is Safe?

Steps may vary, depending on your model. Refer to your manual or contact Shark customer service for tailored instructions.

Have the new Wi-Fi credentials ready before changing.

Shark Robots use Smart Sensor Navigation 2.0 for efficient and effective cleaning. (Source:

Say goodbye to your old Wi-Fi and never hear them complain about slow speeds again!

Step 2: Disconnecting from the Current Wi-Fi Network

Disconnecting from your current Wi-Fi network is essential when changing the network for your Shark robot. Here are five steps to ensure a hassle-free disconnection:

  1. Press the ‘Menu’ button on your Shark robot. This will open the main menu options.
  2. Use the navigation buttons to scroll down to ‘Settings’ and press ‘OK’.
  3. Navigate to ‘Wi-Fi’ and press ‘OK’.
  4. Select ‘Disconnect from Current Network’ and press ‘OK’. This will disconnect your Shark robot from its Wi-Fi network.
  5. Confirm your selection with ‘Yes’ when prompted.

It’s important to note that disconnecting from your current Wi-Fi network may lead to the loss of settings or preferences on your Shark robot.

When it comes to changing the Wi-Fi network on your Shark robot, every detail counts. Remember that disconnecting from the current network is only one step in this process. By following these steps, you can guarantee a successful disconnection before connecting your Shark robot to a new Wi-Fi network.

Did you know that Shark robots initially operated through Bluetooth connectivity? It wasn’t until later updates that they included Wi-Fi capabilities, allowing users to link their Shark robots to their home networks for remote control and scheduling features. This upgrade made cleaning routines more efficient and convenient.

Step 3: Connecting to a New Wi-Fi Network – Time to give your robotic fish friend a strong Wi-Fi signal that even Jaws would envy!

Step 3: Connecting to a New Wi-Fi Network

Connecting your Shark Robot to a new Wi-Fi network? Follow these steps!

  1. Open the Shark Clean app.
  2. Tap “Settings” for preferences.
  3. Select “Wi-Fi Network”.
  4. Choose the network you want.
  5. Enter the Wi-Fi password.
  6. Confirm and Connect.

Remember – if you switch networks or move, use these steps for continuous connectivity.

READ ALSO:  How to Get Vizio TV Out of Zoom Mode?

For future reference, keep your Wi-Fi passwords stored securely.

If the connection doesn’t work? Tell your Shark Robot it needs therapy. It’s got some deep WiFi issues!

Step 4: Verifying the Connection

  1. Start your Shark Robot and plug it in.
  2. Open the SharkClean app and go to settings.
  3. Choose the new network name from the list.
  4. Type in the password and hit ‘Connect’.
  5. Wait as the Shark Robot links to the wifi.
  6. Verify that the connection is stable to receive updates and run smoothly.
  7. If you face any issues, carefully follow these steps for a successful transition.

Troubleshooting Tips

Ensure your Shark Robot is within range of the Wi-Fi network and has a strong signal. Check the Wi-Fi password is correct, since small errors can cause connection problems.

Restart it by turning it off and on, this can often help with connection issues.

Make sure your Shark Robot is connected to the correct access point if there are multiple. Resetting the router may help if there are any temporary glitches.

Contact Shark customer support for troubleshooting steps or assistance with a new Wi-Fi network.

Disable any firewalls or security settings on the router for a successful connection.

Getting the WiFi network connected on a Shark Robot requires technical expertise, so it’s best to consult an expert or reach out to Shark’s customer support team.

Updating the router firmware can help with performance and connection issues according to an article on CNET.

Got it all? Your robotic shark is officially connected!


Exploring the process of switching your Shark Robot to a new Wi-Fi network? We’ve got you covered with our comprehensive guide! Each step has been explained in detail, from resetting to reconfiguring. Make sure to follow every instruction carefully, as errors can cause connectivity issues. If you experience any problems, contact Shark customer support or consult their online resources.

Before starting the procedure, make sure you have all the required info about your new network, like SSID, password, and security protocols. Now you can confidently and efficiently change the Wi-Fi network for your Shark Robot and enjoy uninterrupted cleaning sessions!

READ ALSO:  Where To Put Cable Box For Wall Mounted Tv - A Comprehensive & Detailed Guide

Frequently Asked Questions

1. How do I change the Wi-Fi network on my Shark robot?

To change the Wi-Fi network on your Shark robot, follow these steps:
  • Put the robot in Wi-Fi setup mode by pressing and holding the Wi-Fi button for 5 seconds.
  • Open the SharkClean app on your mobile device and select your robot.
  • Tap on the settings icon and then select "Wi-Fi settings".
  • Follow the on-screen instructions to connect the robot to a new Wi-Fi network.

2. How can I reset my Shark robot's Wi-Fi network?

If you need to reset the Wi-Fi network on your Shark robot, do the following:
  • Press and hold the Wi-Fi button on your robot for 10 seconds until you hear a sound.
  • The robot will emit a tone indicating a successful Wi-Fi network reset.
  • Follow the steps in question 1 to connect your robot to a new Wi-Fi network.

3. Can I change the Wi-Fi network on my Shark robot using the physical buttons?

No, you cannot change the Wi-Fi network on your Shark robot using the physical buttons. You need to use the SharkClean mobile app to change the Wi-Fi network settings.

4. How do I download and install the SharkClean app?

To download and install the SharkClean app, follow these steps:
  • Open the app store on your mobile device (Google Play Store for Android or Apple App Store for iOS).
  • Search for "SharkClean" and select the official SharkClean app.
  • Tap on "Install" or "Get" to begin the download and installation process.
  • Once installed, open the app and follow the on-screen instructions to set up your Shark robot.

5. What should I do if I forget my Wi-Fi network password?

If you forget your Wi-Fi network password, you'll need to retrieve it through your router or contact your internet service provider (ISP). Usually, you can find the password on the back or bottom of your router. If you still can't locate it, reach out to your ISP for assistance.

6. Can I connect my Shark robot to a 5GHz Wi-Fi network?

No, Shark robots are only compatible with 2.4GHz Wi-Fi networks. Make sure your router is broadcasting a 2.4GHz network and connect your Shark robot to that network for optimal performance.

Share This Article
Hey there, I'm Ethan, a tech enthusiast and copywriting expert. With a passion for all things tech, I've had the privilege of working with various tech blogs, sharing my expertise on topics ranging from Tech, Android, Windows, Internet, Social Media, Gadgets, to Reviews. With 8 years of experience in digital marketing, I'm committed to delivering informative and engaging content to my readers. Join me as we dive into the exciting world of technology together.
Leave a comment

Leave a Reply

Your email address will not be published. Required fields are marked *